PE PVC Cling Film Extrusion Line
GWELL as China Plastic Extruder manufacturer, PE PVC cling film extrusion line uses PVC resin powder as the main raw material, mixes various grades of additives, and produces PVC plastic wrap with self-adhesive properties by thoroughly stirring and plasticizing extrusion through an extruder. The winding method adopts an advanced and highly automated four-axis winding system, touch screen operation, PLC control, electrostatic lamination system, no need for adhesive tape, saving material and labor costs.
Key words：Sheet Extrusion Line
Category：
Film Extrusion Line
Download：
Description
PE PVC cling film extrusion line uses PVC resin powder as the main raw material, mixes various grades of additives, and produces PVC plastic wrap with self-adhesive properties by thoroughly stirring and plasticizing extrusion through an extruder.
PE PVC cling film extrusion line Features
- The specially designed PVC mold and extrusion molding process achieve stability and high product qualification rate during high-speed production.
- The PE PVC cling film extrusion line embedded slitting unit cuts and rolls according to the different widths and lengths of the final product. The products produced do not need to be rewound twice.
- The specially designed fixed-length cut-off roll changing device and contact roller unit make the film surface more flat and tidy at the end surface.
PE PVC cling film extrusion line Process Flows
Extruder —- Screen changer —– Melt pump —– T-die —— Calender —– Thickness Scanner —-Cooling Bracket —-Cutting Knife —- Haul-off —-Winder
The cling film is a kind of plastic packaging product of fresh-keeping food for daily use. The cling film has moderate oxygen permeability and moisture permeability adjusts the oxygen content and moisture content around the fresh-keeping products, and blocks the dust in the air, so as to prolong the fresh-keeping period of food.
The vast majority of cling films sold on the market, like commonly used plastic bags, use ethylene masterbatch as raw materials. According to different types of ethylene masterbatch, fresh-keeping films are divided into three categories.
- The first is polyethylene, which is mainly used for food packaging. This film is used for fruits and vegetables we usually buy, including semi-finished products purchased in supermarkets;
- The second is polyvinyl chloride, which can also be used for food packaging, but it has a certain impact on the safety of the human body;
- The third is polyvinylidene chloride, PVDC for short, which is mainly used for the packaging of some cooked food and other products.
Product difference between tape casting and film blowing
In terms of thickness: during tape casting production, the film material is in contact with the forming roll, cooling and forming is fast, the thickness control is easy, and the thickness distribution is better than that of film blowing.
Flatness: the gap between rollers is small in tape casting production, while the film bubble in the film blowing method is unstable. The flatness is better in tape casting production.
Transparency: casting production has a short cooling time and good transparency.
Production: the production output of the tape casting method is large.
China GWELL PE PVC cling film extrusion line Process conditions
GWELL as China Plastic Extruder Supplier,Due to the long and narrow flow channel and fast flow speed in tape casting production, the melt temperature range is usually controlled at 250 ℃ ~ 280 ℃, the temperature of tape casting cooling roll is controlled at 20 ℃ ~ 30 ℃, and the winding tension is low, usually within 10kg, so as to facilitate the migration of adhesive and reduce the internal stress of the finished film.
Viscous control
Good stickiness makes the outer packaging film and a layer of goods stick together to make the goods firm. There are two key methods to obtain stickiness: one is to add PIB or its masterbatch to the polymer; The other is mixing VLDPE.
PIB is a translucent viscous liquid. Special equipment is required for direct addition or transformation of equipment. Usually, PIB masterbatch is adopted. There is a process for PIB to move out, which usually takes three days. In addition, it is also affected by temperature. When the temperature is high, the viscosity is strong; It is not too sticky when the temperature is low, and the viscosity is greatly reduced after stretching.
Therefore, the finished film is best stored in a certain temperature range (the storage temperature is proposed to be 15 ℃ ~ 25 ℃). When VLDPE is mixed, the viscosity is slightly poor, but there are no special requirements for the equipment. The viscosity is relatively stable, not controlled by time, but also affected by temperature.
When the temperature is higher than 30 ℃, it is relatively sticky, and when the temperature is lower than 15 ℃, the viscosity is slightly poor. The amount of LLDPE in the adhesive layer can be adjusted to achieve the required viscosity. This method is often used in three-layer coextrusion.
Parameter
| Extruder Type | Single screw extruder GWS90 | Single screw extruder GWS120 | Single screw extruder GWS150 | Single screw extruder GWS160 |
| Raw material | PE, PVC, PVDC | |||
| Net width | 1500mm | 2200mm | 2800mm | 3200mm |
| Thickness range | 0.02mm-1mm | |||
| weight of product | 15-50g/m2 | |||
| output | 200kg/h | 400kg/h | 550kg/h | 650kg/h |
| Line speed | 200m/min | |||
Application
Cling film is mainly used for microwave food heating, refrigerator food preservation, fresh and cooked food packaging, and in the field of food packaging in family life, supermarkets, hotels, and industrial production.
Client
About Gwell
Innovation drives enterprise progress. Relying on the group’s strong technology, equipment strength and innovation spirit, Gwell is committed to the development of high-tech products and the international market. Gwell also actively exchanges and cooperates with world-class scientific research institutions. The new technologies, new processes and new products developed by Gwell are widely used in building materials(PP hollow sheet extrusion machine, PC optic extrusion machine), home appliances(SPC floor extrusion machine), packaging(PET sheet extrusion machine, EVOH film extrusion machine),
medical treatment(PVC rigid sheet extrusion machine), automobiles(TPU film extrusion machine, PVB film extrusion machine), new energy(EVA solar film extrusion machine), aerospace(TPU film extrusion machine), rail transit(waterproof film extrusion machine) and other fields, which are closely related to human life.
Related Product
GWELL as China Plastic Extruder Supplier, Melt-blown fabric mask extrusion line adopts special hanger-type uniform air-jet spinning die head with independent intellectual property rights, and the melt distribution is uniform. The air pressure of the nozzle is stable, the airflow on both sides is symmetrical, and the airflow in the width direction is uniform.
GWELL stone paper extrusion line can produce synthetic paper products with 40% to 80% inorganic powder added. It is composed of raw material conveying and processing system, edge material recovery system, extrusion equipment, casting equipment, longitudinal stretching machine, transverse stretching machine, winding machine, electrical system and automatic film thickness gauge.
GWELL as China Plastic Extruder manufacturer ，PET stretch film extrusion line adopts single-screw or twin-screw extruder structure to produce cast film of single-layer, double-layer or three-layer co-extrusion structure.
FAQ
What is the main business of GWELL?
Can I go on a field trip to the GWELL factory?
What are the services for purchasing equipment at GWELL?
What types of plastic extrusion machines are available from GWELL?
What is APET PETG CPET Sheet Extrusion Line?
Where does GWELL ship from?
Are there any technical supports for extrusion machine that you need?
Our service will be always at your disposal over the entire extrusion line life.So if you want to know about any other technical supports.Please contact us as soon as possible.
Previous
Contact information
Service supervision
Tel: +86-13615235273
WhatsApp: +86-13615235273
Email: salee@gwell.cn
Address: No. 8 Huyue East Road, Longchi Street, Liuhe District, Nanjing, Jiangsu Province，China
Copyright 2024 China Gwell Machinery Co., Ltd. All Rights Reserved. Powered by: www.300.cn SEO
Copyright 2024 China Gwell Machinery Co., Ltd. All Rights Reserved. Powered by: www.300.cn